1 pcs
Mininum order quantity from 1PCS 1N5237A (DO-35)
Mininum order value from 1USD
2 days
lead time of 1N5237A (DO-35) is from 2 to 5 days
12 hours
Fast quotation of 1N5237A (DO-35) within 12 hours
60 days
60 days full quality warranty of 1N5237A (DO-35)
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of 1N5237A (DO-35),like pictures ,package,datasheet and so on, pls email to [email protected]
The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device.1N5237A (DO-35) Microsemi Commercial Components Group (VA) DIODE ZENER 8.2V 500MW DO-35 P: We recommend that the worst case power dissipation be no greater than 50% of the absolute maximum rating of power dissipation. Carry out adequate heat design.1N5237A (DO-35) Microsemi Commercial Components Group (VA) DIODE ZENER 8.2V 500MW DO-35 PRSM: We recommend that a device be used within the recommended area in the figure, PRSM-tw. Tj: Derate this rating when using a device in order to ensure high reliability. 1N5237A (DO-35) Microsemi Commercial Components Group (VA) DIODE ZENER 8.2V 500MW DO-35 We recommend that the device be used at a Tj of below 120°C.1N5237A (DO-35) Microsemi Commercial Components Group (VA) DIODE ZENER 8.2V 500MW DO-35
Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. Please refer to the Rectifiers databook for further information.1N5237A (DO-35) Microsemi Commercial Components Group (VA) DIODE ZENER 8.2V 500MW DO-35