1 pcs
Mininum order quantity from 1PCS AZ23C9V1-7
Mininum order value from 1USD
2 days
lead time of AZ23C9V1-7 is from 2 to 5 days
12 hours
Fast quotation of AZ23C9V1-7 within 12 hours
60 days
60 days full quality warranty of AZ23C9V1-7
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of AZ23C9V1-7,like pictures ,package,datasheet and so on, pls email to [email protected]
The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device.AZ23C9V1-7 Diodes/Zetex (VA) DIODE ZENER DUAL 9.1V SOT23-3 P: We recommend that the worst case power dissipation be no greater than 50% of the absolute maximum rating of power dissipation. Carry out adequate heat design.AZ23C9V1-7 Diodes/Zetex (VA) DIODE ZENER DUAL 9.1V SOT23-3 PRSM: We recommend that a device be used within the recommended area in the figure, PRSM-tw. Tj: Derate this rating when using a device in order to ensure high reliability. AZ23C9V1-7 Diodes/Zetex (VA) DIODE ZENER DUAL 9.1V SOT23-3 We recommend that the device be used at a Tj of below 120°C.AZ23C9V1-7 Diodes/Zetex (VA) DIODE ZENER DUAL 9.1V SOT23-3
Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. Please refer to the Rectifiers databook for further information.AZ23C9V1-7 Diodes/Zetex (VA) DIODE ZENER DUAL 9.1V SOT23-3