1 pcs
Mininum order quantity from 1PCS EP1K50FI484-3F
Mininum order value from 1USD
2 days
lead time of EP1K50FI484-3F is from 2 to 5 days
12 hours
Fast quotation of EP1K50FI484-3F within 12 hours
60 days
60 days full quality warranty of EP1K50FI484-3F
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of EP1K50FI484-3F,like pictures ,package,datasheet and so on, pls email to [email protected]
ACEX 1K
EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484
EP1K10 EP1K30 EP1K50 EP1K100
Features...
EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484
■ Programmable logic devices (PLDs), providing low cost system-on-a-programmable-chip (SOPC) integration in a single device
– Enhanced embedded array for implementing megafunctions such as efficient memory and specialized logic functions
– Dual-port capability with up to 16-bit width per embedded array block (EAB)
– Logic array for general logic functions
■ High density
– 10,000 to 100,000 typical gates (see Table 1)
– Up to 49,152 RAM bits (4,096 bits per EAB, all of which can be used without reducing logic capacity)
■ Cost-efficient programmable architecture for high-volume
applications
– Cost-optimized process
– Low cost solution for high-performance communications
applications
■ System-level features
– MultiVoltTM I/O pins can drive or be driven by 2.5-V, 3.3-V, or
5.0-V devices
– Low power consumption
– Bidirectional I/O performance (setup time [tSU] and clock-tooutput
delay [tCO]) up to 250 MHz
– Fully compliant with the peripheral component interconnect
Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 2.2 for 3.3-V operation at 33 MHz or 66 MHz.EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484
General Description
Altera ACEX 1K devices provide a die-efficient, low-cost architecture by combining look-up table (LUT) architecture with EABs. LUT-based logic provides optimized performance and efficiency for data-path, register intensive, mathematical, or digital signal processing (DSP) designs, while EABs implement RAM, ROM, dual-port RAM, or first-in first-out (FIFO)
functions.
EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484
These elements make ACEX 1K suitable for complex logic functions and memory functions such as digital signal processing, wide data-path manipulation, data transformation and microcontrollers, as required in high-performance communications applications. Based on reconfigurable CMOS SRAM elements, the ACEX 1K architecture incorporates all features necessary to implement common gate array megafunctions, along with a high pin count to enable an effective interface with system components.EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484
The advanced process and the low voltage requirement of the 2.5-V core allow ACEX 1K devices to meet the
requirements of low-cost, high-volume applications ranging from DSL modems to low-cost switches.EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484.The ability to reconfigure ACEX 1K devices enables complete testing prior to shipment and allows the designer to focus on simulation and design verification. ACEX 1K device reconfigurability eliminates inventory management for gate array designs and test vector generation for fault coverage. EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484.ACEX 1K device performance for some common designs. All performance results were obtained with Synopsys DesignWare or LPM functions. Special design techniques are not required to implement the applications; the designer simply infers or instantiates a function in a Verilog HDL, VHDL, Altera Hardware Description Language (AHDL), or schematic design file.EP1K50FI484-3F Altera IC ACEX 1K FPGA 50K FBGA484