1 pcs
Mininum order quantity from 1PCS PZU9.1BL,315
Mininum order value from 1USD
2 days
lead time of PZU9.1BL,315 is from 2 to 5 days
12 hours
Fast quotation of PZU9.1BL,315 within 12 hours
60 days
60 days full quality warranty of PZU9.1BL,315
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of PZU9.1BL,315,like pictures ,package,datasheet and so on, pls email to [email protected]
The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device.PZU9.1BL,315 NXP Semiconductors DIODE ZENER 9.1V 250MW SOD-882 P: We recommend that the worst case power dissipation be no greater than 50% of the absolute maximum rating of power dissipation. Carry out adequate heat design.PZU9.1BL,315 NXP Semiconductors DIODE ZENER 9.1V 250MW SOD-882 PRSM: We recommend that a device be used within the recommended area in the figure, PRSM-tw. Tj: Derate this rating when using a device in order to ensure high reliability. PZU9.1BL,315 NXP Semiconductors DIODE ZENER 9.1V 250MW SOD-882 We recommend that the device be used at a Tj of below 120°C.PZU9.1BL,315 NXP Semiconductors DIODE ZENER 9.1V 250MW SOD-882
Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. Please refer to the Rectifiers databook for further information.PZU9.1BL,315 NXP Semiconductors DIODE ZENER 9.1V 250MW SOD-882