1 pcs
Mininum order quantity from 1PCS ZM4761A-13
Mininum order value from 1USD
2 days
lead time of ZM4761A-13 is from 2 to 5 days
12 hours
Fast quotation of ZM4761A-13 within 12 hours
60 days
60 days full quality warranty of ZM4761A-13
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of ZM4761A-13,like pictures ,package,datasheet and so on, pls email to [email protected]
The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device.ZM4761A-13 Diodes Inc (VA) DIODE ZENER 75V 1W SMD MELF P: We recommend that the worst case power dissipation be no greater than 50% of the absolute maximum rating of power dissipation. Carry out adequate heat design.ZM4761A-13 Diodes Inc (VA) DIODE ZENER 75V 1W SMD MELF PRSM: We recommend that a device be used within the recommended area in the figure, PRSM-tw. Tj: Derate this rating when using a device in order to ensure high reliability. ZM4761A-13 Diodes Inc (VA) DIODE ZENER 75V 1W SMD MELF We recommend that the device be used at a Tj of below 120°C.ZM4761A-13 Diodes Inc (VA) DIODE ZENER 75V 1W SMD MELF
Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. Please refer to the Rectifiers databook for further information.ZM4761A-13 Diodes Inc (VA) DIODE ZENER 75V 1W SMD MELF