1 pcs
Mininum order quantity from 1PCS MM3Z9V1ST1
Mininum order value from 1USD
2 days
lead time of MM3Z9V1ST1 is from 2 to 5 days
12 hours
Fast quotation of MM3Z9V1ST1 within 12 hours
60 days
60 days full quality warranty of MM3Z9V1ST1
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of MM3Z9V1ST1,like pictures ,package,datasheet and so on, pls email to [email protected]
The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device.MM3Z9V1ST1 ON Semiconductor DIODE ZENER 9.1V 200MW SOD-323 P: We recommend that the worst case power dissipation be no greater than 50% of the absolute maximum rating of power dissipation. Carry out adequate heat design.MM3Z9V1ST1 ON Semiconductor DIODE ZENER 9.1V 200MW SOD-323 PRSM: We recommend that a device be used within the recommended area in the figure, PRSM-tw. Tj: Derate this rating when using a device in order to ensure high reliability. MM3Z9V1ST1 ON Semiconductor DIODE ZENER 9.1V 200MW SOD-323 We recommend that the device be used at a Tj of below 120°C.MM3Z9V1ST1 ON Semiconductor DIODE ZENER 9.1V 200MW SOD-323
Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. Please refer to the Rectifiers databook for further information.MM3Z9V1ST1 ON Semiconductor DIODE ZENER 9.1V 200MW SOD-323