1 pcs
Mininum order quantity from 1PCS TL6120CF160QG
Mininum order value from 1USD
2 days
lead time of TL6120CF160QG is from 2 to 5 days
12 hours
Fast quotation of TL6120CF160QG within 12 hours
60 days
60 days full quality warranty of TL6120CF160QG
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of TL6120CF160QG,like pictures ,package,datasheet and so on, pls email to [email protected]
Switch Contact Ratings
Switch contacts are rated with a maximum voltage and current, and there may be different ratings for AC and DC. The AC values are higher because the current falls to zero many times each second and an arc is less likely to form across the switch contacts. TL6120CF160QG E-Switch (VA) SWITCH TACT SEAL 6.9MM SMT 160GF
For low voltage electronics projects the voltage rating will not matter, but you may need to check the current rating. The maximum current is less for inductive loads (coils and motors) because they cause more sparking at the contacts when switched off. TL6120CF160QG E-Switch (VA) SWITCH TACT SEAL 6.9MM SMT 160GF
Switch Contacts
Several terms are used to describe switch contacts: TL6120CF160QG E-Switch (VA) SWITCH TACT SEAL 6.9MM SMT 160GF
Closed - on position, contacts conducting, there may be several on positions.
For example: the simplest on-off switch has one set of contacts (single pole) and one switching position which conducts (single throw). The switch mechanism has two positions: open (off) and closed (on), but it is called 'single throw' because only one position conducts.
Way - number of conducting positions, three or more. TL6120CF160QG E-Switch (VA) SWITCH TACT SEAL 6.9MM SMT 160GF
Momentary - switch returns to its normal position when released.
Open - off position, contacts not conducting. TL6120CF160QG E-Switch (VA) SWITCH TACT SEAL 6.9MM SMT 160GF
Pole - number of switch contact sets. TL6120CF160QG E-Switch (VA) SWITCH TACT SEAL 6.9MM SMT 160GF
Throw - number of conducting positions, single or double.