1 pcs
Mininum order quantity from 1PCS 219-2LPSTP
Mininum order value from 1USD
2 days
lead time of 219-2LPSTP is from 2 to 5 days
12 hours
Fast quotation of 219-2LPSTP within 12 hours
60 days
60 days full quality warranty of 219-2LPSTP
1, we will give you new and original parts with factory sealed package
2, Quality warranted: All products have to be passed our Quality Control before delivery.
2,If you need more details of 219-2LPSTP,like pictures ,package,datasheet and so on, pls email to [email protected]
Switch Contact Ratings
Switch contacts are rated with a maximum voltage and current, and there may be different ratings for AC and DC. The AC values are higher because the current falls to zero many times each second and an arc is less likely to form across the switch contacts. 219-2LPSTP CTS Resistor Products SWITCH DIP SPST .100" SMD .1A 20
For low voltage electronics projects the voltage rating will not matter, but you may need to check the current rating. The maximum current is less for inductive loads (coils and motors) because they cause more sparking at the contacts when switched off. 219-2LPSTP CTS Resistor Products SWITCH DIP SPST .100" SMD .1A 20
Switch Contacts
Several terms are used to describe switch contacts: 219-2LPSTP CTS Resistor Products SWITCH DIP SPST .100" SMD .1A 20
Closed - on position, contacts conducting, there may be several on positions.
For example: the simplest on-off switch has one set of contacts (single pole) and one switching position which conducts (single throw). The switch mechanism has two positions: open (off) and closed (on), but it is called 'single throw' because only one position conducts.
Way - number of conducting positions, three or more. 219-2LPSTP CTS Resistor Products SWITCH DIP SPST .100" SMD .1A 20
Momentary - switch returns to its normal position when released.
Open - off position, contacts not conducting. 219-2LPSTP CTS Resistor Products SWITCH DIP SPST .100" SMD .1A 20
Pole - number of switch contact sets. 219-2LPSTP CTS Resistor Products SWITCH DIP SPST .100" SMD .1A 20
Throw - number of conducting positions, single or double.